Two-Qubit Gates & Tunable Couplers
Cross-resonance, CZ via flux, and coupler designs.
One transmon is easy to control; two that talk to each other are where the errors live. Two-qubit gates are typically several times slower and an order of magnitude less accurate than single-qubit ones. This lesson derives the main mechanisms (static coupling, the cross-resonance interaction and the flux-activated CZ) and shows how tunable couplers switch interactions off when they are not wanted.
What you’ll learn
- Derive the static shift of two coupled transmons from second-order perturbation theory.
- Derive the cross-resonance and rates for a transmon control qubit, and explain the echo.
- Explain the CZ gate via the – avoided crossing and compute its duration.
- Analyze tunable couplers as interfering coupling paths, and discuss crosstalk, frequency collisions and the state of the art.
Coupled transmons and static ZZ
Two transmons coupled through a capacitor are well described, in the rotating-wave approximation, by
When the qubits are detuned, with , they do not exchange excitations, but the coupling still shifts the levels. The shift of is not the sum of the shifts of and , because only couples to the doubly excited states and :
and repel each other through the matrix element .
The bosonic factor appears because .
Second-order shifts from and, in the same way, from , for which .
The single-excitation shifts cancel, leaving the rate: the frequency shift of one qubit conditioned on the other being excited. It vanishes for harmonic oscillators, .
Why does the static shift vanish for two coupled harmonic oscillators ()?
- Because harmonic oscillators cannot be coupled
- Because the levels of coupled linear oscillators are sums of normal-mode energies, so exactly
- Because must vanish for harmonic oscillators
- Because the rotating-wave approximation fails
Show the answer
B. Because the levels of coupled linear oscillators are sums of normal-mode energies, so exactly
For linear oscillators the normal modes are exact and energies add, so there is no conditional shift; in the formula, kills the numerator. Conditional dynamics, and hence entangling gates, need nonlinearity.
Cross-resonance: an all-microwave gate
Many processors use fixed-frequency transmons, which need no flux line and suffer no flux noise. To entangle them, drive the control qubit 1 at the frequency of the target qubit 2 (Rigetti & Devoret 2010; Chow et al. 2011). In the frame rotating at the drive reads , off-resonant from qubit 1 by ; call the exchange coupling (the of the previous step).
With qubit 1 in level , the drive and the coupling combine at second order into an effective drive on qubit 2. One virtual path passes through (energy denominator ), the other through (denominator ); the bosonic matrix elements contribute the factors and .
The target's drive depends on the control's state: the origin of the entanglement.
Write and on the control.
To first order in . In the two-level limit , and . The transmon's second level both modifies the rate and creates a spurious term (compare Magesan & Gambetta 2020).
A rotation by , , equals a CNOT up to single-qubit gates, so the gate time is . The rate is small, , and the drive cannot be made arbitrarily strong without exciting the control, so cross-resonance gates typically take a few hundred ns. Note the pole at : when the control's transition hits the target frequency the perturbative picture breaks down. It is one of several frequency collisions that fixed-frequency designs must avoid.
CZ via the |11⟩–|20⟩ avoided crossing
With frequency-tunable transmons, the strongest conditional interaction is the very one that produced . Tune qubit 1 with a flux pulse until , that is , the pole of the formula. In the two-dimensional subspace the coupling is , and no other computational state is resonant with anything (Strauch et al. 2003; DiCarlo et al. 2009).
A two-level system with Rabi frequency .
After one full oscillation, : the population returns, and picks up a minus sign.
The other states only acquire single-qubit dynamical phases, removed with virtual gates. The conditional phase makes this a CZ.
For MHz, how long does this diabatic CZ take, in ns? (, with in rad/s.)
Show the answer
35 ns
s ns. Practical CZ gates take a few tens of ns and use adiabatic or "fast-adiabatic" pulse shapes (Martinis & Geller 2014) to keep leakage into low.
Tunable couplers, crosstalk and the frontier
Fixed coupling is a compromise: strong enough for fast gates means strong while idling. A tunable coupler is a third element, often itself a flux-tunable transmon with frequency above the qubits, coupled to each qubit (, ), alongside a small direct coupling between the qubits (Yan et al. 2018).
Eliminating the coupler in the dispersive regime, , gives an effective exchange that sums the direct path and a virtual path through the coupler. Counter-rotating terms add corrections of the same form with in the denominators (Yan et al. 2018).
With the coupler above the qubits the two paths have opposite signs, so one particular coupler frequency switches the interaction off; moving the coupler closer to the qubits turns it on.
The residual is nulled at a nearby, not identical, coupler bias, because the coupler's own higher levels also contribute.
| Scheme | Hardware | Typical duration | Main issues |
|---|---|---|---|
| Echoed cross-resonance | fixed-frequency qubits, fixed coupling | ~200–500 ns | slow; frequency collisions; static ; spectator errors |
| Flux-activated CZ | tunable qubits and/or couplers | ~20–60 ns | flux noise away from sweet spots; leakage to ; flux-pulse distortions |
| Tunable-coupler CZ, iSWAP or fSim | tunable coupler between the qubits | ~20–60 ns | more control lines; coupler calibration |
| Parametric and microwave-activated gates | modulated couplers, or fixed qubits with strong drives | ~100–300 ns | drive-induced shifts; calibration |
Key takeaways
- Coupled transmons acquire a static shift , a coherent error unless cancelled or switched off.
- Cross-resonance makes the target's drive depend on the control's state: , plus a spurious ; the echo removes , and to first order.
- Flux-tuning to the – resonance for one full oscillation gives a CZ in , about 35 ns for MHz; leakage is the main risk.
- Tunable couplers create interfering coupling paths whose cancellation switches interactions off, suppressing and enabling fast gates; crosstalk and uniformity dominate at scale.
Check yourself
In the interactive lesson these are scored with your confidence, and what you miss comes back for review.
The static shift diverges at . What happens physically there?
- becomes resonant with , perturbation theory breaks down and the two states hybridize strongly: the working point of a CZ gate
- The qubits decouple
- becomes resonant with
- Qubit 1 spontaneously leaks into its third level
Show the answer
A. becomes resonant with , perturbation theory breaks down and the two states hybridize strongly: the working point of a CZ gate
At the energies and coincide, so second-order perturbation theory fails and the levels anticross with splitting . Flux-activated CZ gates exploit exactly this point; fixed-frequency designs must avoid it.
In the two-level limit, what is the leading cross-resonance rate, and why are CR gates relatively slow?
- : limited only by drive power
- : limited by the coupling
- : suppressed by the small ratio , while cannot be large without exciting the control
- : limited by the detuning
Show the answer
C. : suppressed by the small ratio , while cannot be large without exciting the control
The conditional drive is second order: the drive times the dressing . With and of tens of MHz, is of order 1–2 MHz, giving gate times of hundreds of ns.
Which terms does the echoed sequence cancel to first order?
- only
- , and the static
- All terms, leaving the identity
- Only terms acting on the target
Show the answer
B. , and the static
Terms odd in flip with the drive sign; terms containing flip under the control's pulses. flips twice and survives; (odd, no ), and and (even, with ), flip once and cancel.
How does a tunable coupler placed above both qubit frequencies switch the qubit–qubit interaction off?
- By absorbing the photons the qubits emit
- By detuning the qubits from each other
- By shorting the junctions
- The virtual path through the coupler has the opposite sign to the direct capacitive coupling, and at one coupler frequency the two cancel
Show the answer
D. The virtual path through the coupler has the opposite sign to the direct capacitive coupling, and at one coupler frequency the two cancel
with : the second term is negative and can cancel . Tuning moves smoothly between off and strongly on.
Further reading
- C. Rigetti & M. Devoret, "Fully microwave-tunable universal gates in superconducting qubits with linear couplings and fixed transition frequencies", Physical Review B 81, 134507 (2010); J. M. Chow et al., "Simple all-microwave entangling gate for fixed-frequency superconducting qubits", Physical Review Letters 107, 080502 (2011).
- E. Magesan & J. M. Gambetta, "Effective Hamiltonian models of the cross-resonance gate", Physical Review A 101, 052308 (2020).
- F. W. Strauch et al., "Quantum logic gates for coupled superconducting phase qubits", Physical Review Letters 91, 167005 (2003); L. DiCarlo et al., "Demonstration of two-qubit algorithms with a superconducting quantum processor", Nature 460, 240 (2009).
- F. Yan et al., "Tunable coupling scheme for implementing high-fidelity two-qubit gates", Physical Review Applied 10, 054062 (2018).
- P. Krantz et al., "A quantum engineer's guide to superconducting qubits", Applied Physics Reviews 6, 021318 (2019).